1. Avoid collision.

這是購得鐵藝門后要注意到的一點，鐵藝門在搬運過程中應小心輕放；放置鐵藝門的地方應是硬物不常碰到的地方；地方一經選定，就不應頻繁變動；安裝鐵藝門的墻面還應保持平整，使鐵藝門安裝安穩、平實，若搖晃不穩，日久會使鐵藝門產生輕微變形，影響鐵藝門的使用壽命。

This is the first thing to pay attention to after purchasing the iron door. The iron door should be handled with care in the process of handling; The place where the iron door is placed should be a place where hard objects do not often touch; Once a place is selected, it should not change frequently; The wall on which the iron door is installed shall also be kept flat to ensure that the installation of the iron door is stable and flat. If it is unstable, the iron door will be slightly deformed over time and affect the service life of the iron door.

2.潔凈除塵。

2. Clean dust removal.

對于愛干凈的朋友來說，更好選用純棉針織品為抹布，擦拭鐵藝門的表面。對于鐵藝門上的凹陷處和浮雕紋飾中的灰塵，則更好用細軟羊毛刷來除塵。

For clean friends, it's best to use pure cotton knitwear as rag to wipe the surface of iron door. For the dust in the depression and relief decoration on the iron door, it is best to use a fine soft wool brush to remove the dust.

3.遠離酸堿。

3. Keep away from acid and alkali.

對鐵藝門有腐蝕作用的酸堿是鐵藝門的"頭號殺手"。鐵藝門上若不慎沾上酸（如硫酸、食醋）、堿（如甲堿、肥皂水、蘇打水），應立即用清水把污處沖凈，再用干棉布擦干。

The acid-base that corrodes the iron gate is the "number one killer" of the iron gate. If acid (such as sulfuric acid and vinegar) and alkali (such as methylalkali, soapy water and soda water) are accidentally stained on the iron door, clean the dirty place with clean water immediately and wipe it dry with dry cotton cloth.

4.隔絕潮濕。

4. Isolate from moisture.

鐵藝門應安裝在比較通風的地方，潮濕會使金屬出現銹蝕，鍍鉻產生脫膜等。

The iron door shall be installed in a relatively ventilated place. Moisture will cause metal corrosion, chromium plating and film removal.

5.消除銹跡。

5. Remove rust.

如果鐵藝門生了銹，不要自作主張用砂紙打磨。銹跡較小較淺的，可用棉紗蘸機油涂于銹處，稍候片刻，用布揩擦便可消除銹跡。若銹跡已經擴大變重，則應請有關技術人員來維修。

If the iron craftsman is rusty, don't polish it with sandpaper. If the rust is small and shallow, cotton yarn can be dipped in engine oil and applied to the rust. After a while, wipe it with a cloth to eliminate the rust. If the rust has expanded and become heavier, please ask relevant technicians to repair it.

我們一直在堅持分享的路上濟南鐵藝大門http://jmxiantai.com真正為您解決您所需要的問題.

We have been sticking to the road of sharing Jinan iron gate http://jmxiantai.com Truly solve the problems you need